750ml Manual Pu Foam Insulation Spray / Seals For Bonding , Soundproofing

750ml Manual Pu Foam Insulation Spray / Seals For Bonding , Soundproofing

1) sealant pu foam spray producer
2) 750ml
3) Fire-retardant, heat-insulation
4) big bubble volume

Description:

I-like Wood PU Foam is new product researched and developed by our company, which will solve the various problems of hardship toward wooden door’s fixing. SUNRISE's leading market position in China is evidenced by numerous awards and product acknowledgements granted by prestigious institutions.

Higher bonding strength, can be tightly agglutinate door frame and wall
Stable foam, can improve the fixing effect of the wood
Can hold strong shake and cushion the impact effectively
Fast and convenient when installing, to save labor cost

Features:

Processing temperature (can & environment): +5°C~ -35°C
Optimum processing temperature: +18°C~ -25°C
Airproof, sound insulation, heat preservation and vibration-resistance
Can be lacquered
Environment-protective
Unresisting ultraviolet radiation, surface disposal is recommended

Directions:

Application area: Especially be suitable for the bonding, mounting, fixing, soundproofing, and insulating sealing, damp-proofing of wooden door, theftproof door, etc.

1. Make sure surface is free of oil and dirt.
2. Shake can vigorously;
3. Install PU foam gun or spraying straw to the valve according to the instruction.
4. Convert the can, then press trigger, there would be foam flowing out.
5. In a general way, just fill in the hole or gap by 70% when gun-type, and 50% when straw-type.
6. Polyurethane foam sealants require some humidity in order to cure properly. For best results, apply in temperatures between 60-100°F (16-38°C). Allow foam to cure fully before replacing baseboards, window or door frames.
7. Paint outdoor applications to avoid discoloration. Wait until foam is rigid before painting or trimming (30-60 minutes).

Precautions:

Notice:There should be no grease, oil or dust
Do not spray water in order to avoid the distortion of the wooden door Shake can vigorously
Shake can vigorously
Install PU foam gun or spraying tube to the valve according to the instruction
Convert the can, then press trigger, there would be foam flowing out
In a general way, just fill in the hole or gap by 70% when gun-type, or 50% when straw-type.

Package: